DriversCollection.com
Kopioida Ajuri Thrustmaster Nascar Pro Force Feedback 2 Thrustmaster Calibration Tool v.1.03lle v.1.03 varten Windows XP
Ilmaiseksi Ajuri Thrustmaster Nascar Pro Force Feedback 2 Thrustmaster Calibration Tool v.1.03lle v.1.03.
Kategoria:Joysticks
Valmistaja:Thrustmaster
Laitteisto:Thrustmaster Nascar Pro Force Feedback 2
Ohjelman tyyppi:Software
Nimi:Thrustmaster Calibration Tool
Versio:1.03
Tiedoston koko:3.01Mb
Arkiston tyyppi:LZX. Katsoa arkiston sisältö
Kirjoittamisen päivämäärä:
27 Jan 2006
27 Jan 2006
Järjestelmä:Windows XP
Status:Free
latausta:51
Kuvaus:Features:
When installing your accessory (or Force Feedback drivers), calibration of your accessory is carried out automatically
The Thrustmaster Calibration Tool V 1.03 software allows you to carry out manual calibration (which will replace the automatic calibration) on
* The steering wheel of your racing whee
(in order to center it perfectly and obtain the maximum left and right values
* The pedals attached to your racing whee
(in order to eliminate any potential dead zones
* The mini-sticks on your gamepa
(in order to center them perfectly and eliminate any potential dead zones
* The different axes on your joystic
(in order to center them perfectly and eliminate any potential dead zones
Important points to note
- If you have a Force Feedback or vibrating accessory, you must first install the Force Feedback drivers before carrying out manual calibration
- Following manual calibration, you will have to carry out another manual calibration if you reinstall the Force Feedback drivers
- Use the Include the pedals option (available with most racing wheels) only in the event of a problem with values on the pedals. This option may require recalibration when switching to another axis mode (2, 3 or 5 axes)
- To return to automatic calibration mode, simply re-launch the software and click Reset Calibration
- In the event of a malfunction following manual calibration, repeat the procedure after clicking Reset Calibration. Should the problem persist, uninstall and then reinstall the software (as well as the Force Feedback drivers, if necessary).
Installation Procedure
1- Download the driver
2- Once the download is complete, double-click the installation (.exe) file and follow the instructions provided
3- Once installation is complete, you will find the calibration software tool in the following menu
Start / Programs / Thrustmaster / Calibration Too
To uninstall: In the Windows Control Panel, go to Add or Remove Programs, select Thrustmaster Calibration Tool and click Remove
Requirements
- Windows XP (Service Pack 1 or 2 is required)
- DirectX 9.0
- Software not tested with Windows 98 SE/Me/200
- Software not tested with the Thrustmapper programming software
When installing your accessory (or Force Feedback drivers), calibration of your accessory is carried out automatically
The Thrustmaster Calibration Tool V 1.03 software allows you to carry out manual calibration (which will replace the automatic calibration) on
* The steering wheel of your racing whee
(in order to center it perfectly and obtain the maximum left and right values
* The pedals attached to your racing whee
(in order to eliminate any potential dead zones
* The mini-sticks on your gamepa
(in order to center them perfectly and eliminate any potential dead zones
* The different axes on your joystic
(in order to center them perfectly and eliminate any potential dead zones
Important points to note
- If you have a Force Feedback or vibrating accessory, you must first install the Force Feedback drivers before carrying out manual calibration
- Following manual calibration, you will have to carry out another manual calibration if you reinstall the Force Feedback drivers
- Use the Include the pedals option (available with most racing wheels) only in the event of a problem with values on the pedals. This option may require recalibration when switching to another axis mode (2, 3 or 5 axes)
- To return to automatic calibration mode, simply re-launch the software and click Reset Calibration
- In the event of a malfunction following manual calibration, repeat the procedure after clicking Reset Calibration. Should the problem persist, uninstall and then reinstall the software (as well as the Force Feedback drivers, if necessary).
Installation Procedure
1- Download the driver
2- Once the download is complete, double-click the installation (.exe) file and follow the instructions provided
3- Once installation is complete, you will find the calibration software tool in the following menu
Start / Programs / Thrustmaster / Calibration Too
To uninstall: In the Windows Control Panel, go to Add or Remove Programs, select Thrustmaster Calibration Tool and click Remove
Requirements
- Windows XP (Service Pack 1 or 2 is required)
- DirectX 9.0
- Software not tested with Windows 98 SE/Me/200
- Software not tested with the Thrustmapper programming software
Oikeustiedot:Kaikki ohjelmisto DriversCollection.com-sivulla on ilmaista. Kaikki nimet ja kauppamerkit kuuluvat omistajilleen.
Huomio:Eriä ohjelmia on saatu tarkistamattomista lähteistä. Takaamme niiden yhteensovinta ja toimintakyky. Aina tarkista ladatut tiedostot virusvastaisten ohjelmien avulla. Emme kanna vastuuta mahdollisista menoista, jotka syntyivät ladattujen ohjelmien asetuksessa. Tiedostójen lataus DriversCollection.com:lta merkitsee tiedottamistasi siitä ja suostumusta näiden ehtojen kanssa Agreement.
Samanlaisia tiedostot:
Ohjelman tyyppi:Driver
Versio:2009_FFD_2
Järjestelmä:Windows 8, Windows 7, Windows VistaWindows XP
Kuvaus:Driver for Thrustmaster Nascar Pro Force Feedback 2
Kopioida Thrustmaster Nascar Pro Force Feedback 2 Ajuri v.2009_FFD_2
Nimi:Drivers
Versio:2009_FFD_1
Järjestelmä:Windows 7, Windows Vista, Windows Vista 64-bit, Windows XPWindows XP 64-bit
Kuvaus:Drivers for Windows XP/XP 64 bits/ Windows Vista 32 bits/Vista
64 bits/ Windows 7
Kopioida Thrustmaster Nascar Pro Force Feedback 2 Drivers v.2009_FFD_1
Nimi:Driver package
Järjestelmä:Windows Vista, Windows Vista 64-bit, Windows XPWindows XP 64-bit
Kuvaus:System requirements:
- Windows XP*/XP 64 bits/Vista 32 bits/Vista 64 bits
*Service Pack 2 for Windows XP
- DirectX 9.0c
Installation procedure:
1- Remove any previous driver versions.
2- Remove any version of the Thrustmapper programming software.
(As compatibility of Thrustmapper with this new driver is not certified, uninstalling the pr... Kopioida Thrustmaster Nascar Pro Force Feedback 2 Ajuri package
- Windows XP*/XP 64 bits/Vista 32 bits/Vista 64 bits
*Service Pack 2 for Windows XP
- DirectX 9.0c
Installation procedure:
1- Remove any previous driver versions.
2- Remove any version of the Thrustmapper programming software.
(As compatibility of Thrustmapper with this new driver is not certified, uninstalling the pr... Kopioida Thrustmaster Nascar Pro Force Feedback 2 Ajuri package
Ohjelman tyyppi:Thrustmapper programming Software
Versio:4.02
Järjestelmä:Windows XP, Windows 2000, Windows MEWindows 98 SE
Kuvaus:***NOTE: If your accessory is not installed and/or doesn't work
properly by itself first, installing this software won't provide
any improvement.***
First introduced as an all-in-one driver/ software package, Version 4.0x marks a new beginning for the Thrustmaster software.
PLEASE NOTE: IF BEING USED IN CONJUNCTION WITH FFB DRIVER v. 10.0.3: you will need to re-install this s... Kopioida Thrustmaster Nascar Pro Force Feedback 2 Thrustmapper programming Software v.4.02
First introduced as an all-in-one driver/ software package, Version 4.0x marks a new beginning for the Thrustmaster software.
PLEASE NOTE: IF BEING USED IN CONJUNCTION WITH FFB DRIVER v. 10.0.3: you will need to re-install this s... Kopioida Thrustmaster Nascar Pro Force Feedback 2 Thrustmapper programming Software v.4.02
Ohjelman tyyppi:Driver
Versio:Package 4.FFD.2006
Järjestelmä:Windows Vista, Windows Vista 64-bit, Windows XP, Windows XP 64-bitWindows 2000
Kuvaus:System requirements:
- Windows 2000/XP*/XP 64 bits/Vista 32 bits/Vista 64 bits
*Service Pack 3 for Windows 2000
*Service Pack 2 for Windows XP
- DirectX 9.0c
Installation procedure:
1- Remove any previous driver versions.
2- Remove any version of the Thrustmapper programming software.
(As compatibility of Thrustmapper with this... Kopioida Thrustmaster Nascar Pro Force Feedback 2 Ajuri v.Package 4.FFD.2006
- Windows 2000/XP*/XP 64 bits/Vista 32 bits/Vista 64 bits
*Service Pack 3 for Windows 2000
*Service Pack 2 for Windows XP
- DirectX 9.0c
Installation procedure:
1- Remove any previous driver versions.
2- Remove any version of the Thrustmapper programming software.
(As compatibility of Thrustmapper with this... Kopioida Thrustmaster Nascar Pro Force Feedback 2 Ajuri v.Package 4.FFD.2006